Home / Solar Batteries / Pylontech Battery
Pick a compact rack module or an all-in-one hybrid system. Both use safe LFP chemistry and expand as your household’s energy needs grow.
We size your Pylontech system around your solar output, evening usage and the circuits you want powered during an outage. Day-to-day, you manage it all in the PyHome app.
Inverter, PV input and battery modules sit in a single unit, with no extra switch box or junction box.
Start with one 5.12 kWh module and add more, up to four modules and 20.48 kWh.
Choose how much charge to keep in reserve (5% to 50%) for essential circuits during an outage.
Set up to four charge and discharge periods, repeated on the days of the week you choose.
Switch between self-consumption, feed-in priority, backup and off-grid modes from the PyHome app.
Thoughtful design, proven equipment and careful installation turn everyday energy into lasting value.
Store daytime solar and use it after sunset instead of buying expensive grid electricity.
Keep essential circuits running when the grid goes down, with a properly configured backup setup.
App monitoring and intelligent control help you get the most from every stored kilowatt.
Capacity matched to your solar, usage and backup goals, installed by CEC-accredited local pros.
Compare Pylontech’s modular battery ranges, from rack-mounted modules to all-in-one hybrid systems, then choose the one that suits your home and plan for growth.
Modular 48 V LFP battery modules
Stackable 5.12 kWh LFP modules
All-in-one hybrid with built-in inverter
Create your plant in the PyHome app, pick a working mode and set your charge and discharge times. The system then follows your plan every day, and the same app lets you check on it from your phone.
Single fixed package
Chosen on headline size
Added late in the process
Basic battery status
Assumed compatibility
Battery-only approach
Installed cost depends on the number of battery modules, inverter size, backup circuits, switchboard work and site access.
A dependable Pylontech result begins with the right match between battery, inverter and home. We check your solar panels, single-phase supply, switchboard and backup circuits, then plan the installation to suit Australian wiring requirements.
Consistent workmanship and genuine accountability.
System design informed by Canberra homes and conditions.
A detailed scope with costs, incentives and inclusions explained.
Real help with monitoring and after-sales questions.
The right Pylontech system depends on capacity, compatible solar equipment, backup needs, and plans. These are the questions we hear most often.
The US Series is a battery module that pairs with a separate compatible inverter. The Force H3X is an all-in-one unit with the inverter and solar inputs built in.
The Force H3X is IP55-rated, but it should be kept away from frost and direct sunlight. The US3000C is IP20, so it is suitable for indoor installation.
The Force H3X carries a 10-year warranty when the system stays online, and 5 years if it is not connected. The warranty for the US Series varies by model, so we confirm it in your quote.
The Force H3X supports DRM0 under AS/NZS 4777 and has a dedicated Australian wiring setup. A licensed installer completes the connection.
The Force H3X is set up through the PyHome app, where you choose a working mode and set charge and discharge times.
Get a clear Pylontech recommendation built around your solar system, evening usage, backup priorities and future energy plans.
Free, tailored and no obligation.
Share a few details about your property and energy use. We’ll prepare a clear, no-obligation recommendation.
